StepWell Sanitizing Mat

MSRP:
Was:
Now: $250.00
(You save )
(No reviews yet) Write a Review
These mats are made to order and require 3-5 business days production time.

The StepWell mat provides an all-in-one solution for safely sanitizing shoes. It features a 2' x 3' well that holds an abrasive insert and your preferred liquid sanitizer, followed by a 3' x 5' carpeted section to help remove any excess moisture from shoes, reducing the likelihood of slips following sanitation. Wash, wipe, and walk on safely!

  • Available in three designs
  • The insert serves as a splash guard and helps dislodge any dirt or debris from the bottom of shoes so the fluid can reach the entire sole surface.
  • Each mat includes one insert; additional inserts are available in packs of four
  • Well holds one insert and approximately 84 ounces (2.5 L) of sanitizing solution (not included)
  • Compatible with most sanitizing/disinfecting solutions. Works best with quaternary or hydrogen peroxide sanitizing solutions. See Installation Instructions for details on recommended dilutions.
  • Overall mat measures approximately 3' x 7'
  • Made in the USA

Please note: Mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

INSTALLATION INSTRUCTIONS

The StepWell mat works best with quaternary and hydrogen peroxide sanitizing solutions; can be used with chlorine bleach solutions, but failure to adhere to recommended concentrate can damage the mat.

  • Quaternary ammonium should be used per recommended dilution instructions on the label (for sanitizing level protection).
  • 3% hydrogen peroxide solutions can be used without further dilution.
  • 6% chlorine bleach should be used at a concentration of 0.4% (0.5 oz. per gallon). Caution: Do not use mat as a work surface to prepare bleach solution, as undiluted bleach may cause permanent color loss.

With the insert in the well, slowly pour your sanitizing solution over the insert. Fill the well to the level of slight puddling when stepped on (approximately 84.5 ounces or 2.5 liters of solution).

Refill the well when puddling no longer occurs.

The mat may be used without an insert, but please be advised that disinfectant loss is more likely to occur due to splashing/sloshing when the insert is not used. Fill the well about 2/3 to allow for displacement when shoes are placed in the well.

MAT CARE INSTRUCTIONS

The life of your insert will depend greatly on the amount of foot traffic your mat receives. The insert should be replaced at your discretion, but we recommend replacing it when it begins to show signs of wear.

For the well and insert, we recommend weekly cleaning. Simply wipe the well down or hose off and allow to dry.

The insert can be rinsed in a sink or hosed off.

The carpeted portion of the mat can be cleaned in several different ways:

  • Vacuum regularly (daily in high-traffic areas; weekly in lower-traffic applications)
  • Clean with an extractor. Hang to dry.
  • Hose off. Hang to dry.

STOCK & SHIPPING INFORMATION

StepWell mats are made to order and typically require 3-5 business days production time.  Larger orders may require a slightly longer production time.

All mats are shipped via UPS Ground.  Once your order is completely fulfilled, you will receive shipping notification.  However, if your order includes multiple items, please note that items will ship as they are ready; we will not wait until your order is complete to ship items.  Because of this, it's possible that you may receive one or more items in your order before you receiving shipping notification (which is only triggered by the shipping of the last item).

SURFACE
Material: Type 6,6 nylon (printed/acid-dyed)
Weight: 32 ounces/yard
2
Construction: Cut pile
Substrate: Freudenberg Lutradur polyester spunbound non-woven fabric (3.8 ounces/yard
2)


BACKING
Material: Nitrile rubber (smooth)
Thickness: 65-mil (body thickness); 107-mil (carpet border thickness); 130-mil (well border thickness)


WELL
Depth: 1/4 inch (0.25")
Fluid Volume: 84.5 ounces (2.5 L) with insert


INSERT
Material: PET (polyethylene terephthalate) printed/acid-dyed
Weight: 30 ounces/yard
2
Construction: Needle-punched


OVERALL MAT THICKNESS: 3/8" (0.375")

Additional Details

Mat Type:
Standard Sizes
Chemical Resistant:
Yes

Related Products

Customers Also Viewed